May 5, 2021

Fully Tempered & Heat Strengthened Glass

Trutuff Fully Tempered and Heat Strengthened glasses are of  supreme industrial grade. They are produced by processing glasses in Horizontal Roller Heath Oscillating Tempering Furnace at typically 625° – to form uniformly heated glass which is then rapidly cooled in a process called ‘quenching the glass’ by simultaneously blowing air through evenly distributed high pressure air nozzles on both sides of the glass. A high air-flow rate is used to produce Trutuff Fully Tempered Glass and a much lower airflow rate leads to the production of Trutuff Heat-strengthened Glass. Both the glasses have increased strength to resist higher levels of impact, mechanical load and thermal stress. Fully Tempered Glass Features Size Range: 300 x 300 mm to 2440 x 5000 mm Thickness Range: 4 mm to 10 mm Types of glasses: Clear, Tinted, Reflective Soft Coat, Reflective Hard Coat, Low-E, Planistrong Qualities Four to five times stronger than annealed glass of the same thickness and configuration When broken, tempered glass fractures into small fragments. This reduces the possibility of serious injury when compared to annealed glass High mechanical strength from stress-induced toughening process High thermal strength when compared with annealed glass. Can withstand temperature differential of 250° C. Stable at temperatures ranging from -70° to 250° C Higher mechanical strength means it can be used with mechanical fittings like Patch, Spider, Hinge, Disc, Point Fixing Offers Solar Control and UV elimination properties Heat-strengthened Glass Size Range: 300 x 300 mm to 2440 x 5000 mm Thickness Range: 4 mm to 10 mm Types of glasses: Clear, Tinted, Reflective Soft Coat, Reflective Hard Coat, Low-E, Planistrong Qualities Three times as strong as annealed glass of the same thickness and configuration Relatively lower optical distortion when compared to tempered glass.  Fractures like annealed glass. Tends to remain in the opening when broken. Intended for general glazing where additional strength and/or resistance to mechanical and/or thermal stress is desired. Should not be replaced where safety glazing is required. Enquire NowRead more
Double Glazed Glass Doors by Trutuff
May 4, 2021

Insulated Glazed Glass

Trutuff Insulated glass Units have two or three panes of glass separated with a spacer. It contains a layer of air or gas between the layers of glass. This gives the glass the properties of excellent thermal insulation, soundproofing and heat resistance. Qualities: Insulated glass units are good heat insulators. The layers act as a barrier. This saves energy and reduces cost of electricity required for climate control.  Widely used in commercial and residential building located close to heavy traffic and densely populated areas – to cut out noise pollution.  Resistant to UV light and prevents fading of fabric and furniture inside the room.  With the use of Tempered Glass and Heat Strengthened Glass, Insulated glass Units become additionally safe. Enquire NowRead more
April 21, 2019

Laminated Glass

It is a safety glass consisting of two or more glass layers. These are permanently bonded together with one or more interlayer, generally Polyvinyl Butyral (PVB) with the help of high heat and pressure. When laminated glass gets broken, the fragments of it stick to the interlayer and prevents from breaking into large sharp, dangerous shards and scattering. The PVB interlayer gives the glass higher sound insulation and acts as protection against UV radiation. Laminated glass is preferred for interiors and exteriors of residential buildings, commercial buildings, hotels, showrooms, shopping malls etc. Qualities: The product delivers higher safety and security Can be heat tempered or strengthened to increase its mechanical strength and thermal resistance Offers higher protection against UV rays Is an excellent sound insulator Reduces seeping of heat from sunlight into the room, thus reducing air-conditioning costs Enquire NowRead more